Seachem | Safe

Description

Description
Safe™ is the complete and concentrated dry conditioner for both fresh and salt water. Safe™ removes chlorine, chloramine and ammonia. Safe™ converts ammonia into a safe, non-toxic form that is readily removed by the tank’s biofilter. Safe™ may be used during tank cycling to alleviate ammonia/nitrite toxicity. Safe™ detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them. Safe™ is non-acidic and will not impact pH. Safe™ will not overactivate skimmers. Use at start-up and whenever adding or replacing water.
Directions
NOTE:
These directions supersede all other prior packaging.
The standard dose of 100 mg/100 L of water will remove 1 mg/L (ppm) of chloramine, 1.4 mg/L (ppm) of chlorine and 0.33 mg/L (ppm) of ammonia. A formula to determine the amount to use in mg for a given chloramine level can be found in the FAQ.
50 g
Use 200 mg Safe (scoop) per each 200 L (50 gallons) as needed to reduce chlorine and chloramine or per 50 L (13 gallons) for ammonia.
All other sizes
Use 1.25 g (1/4 tsp.) for every 1,250 L (300 US gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 US gallons) for ammonia. For precise dosing, use the Seachem
Digital Spoon Scale
.
May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.
Sizes
50 g, 250 g, 1 kg, 4 kg
Listing and template services provided by inkFrog